obey-robots.txt
Onderwerp bekijken
Alle modems geleverd door XS4ALL, waaronder de FRITZ!Box 7170.
 Onderwerp afdrukken
PPPoE Pass Through
lynx
Beste forum gebruikers

Wij hebben op de zaak 2 internet verbindingen.
1x kabel voor normaal internet gebruik
1x Xs4all voor vpn verbindingen met andere locaties. (telefoon en wifi staan uit)

De kabelmodem en de Fritzbox 7170 staan op een Billion dual wan router welke de boel netjes verdeeld zoals wij het willen hebben.
Voor de VPN verbindingen is het nodig dat de router het externe IP adres krijgt toegewezen. Bij de instellingen van het modem staat de optie "Fritz!Box als DSL modem gebruiken". Dus PPPoE Pass Through. De router logt in met de gebruikersnaam en wachtwoord (voor zover dat nodig is) via PPPoE.

Dit werkte allemaal prima. Tot dat we zijn overgestapt naar Vdsl en een 40mbit abbo.
Hierbij wordt een 7340 geleverd. Deze heeft ook de optie "Fritz!Box als DSL modem gebruiken", dus even instellen en klaar zou je denken.
Nou niet dus.
De instellingen van de oude 7170 en de 7340 staan voor zover mogelijk hetzelfde, de router staat goed ingesteld maar toch wil het niet werken.
De router maakt geen verbinding met XS4All.

Ik heb de helpdesk gebeld en deze hebben me doorverwezen naar AVM.
Volgens de man van AVM was het zoiezo niet mogelijk wat ik wilde, ondanks dat het me op de 7170 toch gelukt was. De man aan de telefoon zou het doorspelen naar z'n collega en die zou mij mailen. De volgende mail kreeg ik terug:


---------------------------------------------------------------------------
Note: Additions to your support case can be made using the URL:
http://www.avm.de/en/service/support/amendment.php
or go to
http://www.avm.de/en and select SERVICE > SUPPORT. Here you will find a link to the Supplementary Form.

If no additional requests are made within 14 days, this case will be closed.
---------------------------------------------------------------------------

Ihre Ticket-ID CID2523964

zoals telefonisch besproken, hier de documentatie voor uw aanvraag.

The FRITZ!Box can only be operated as a router and as a DSL modem simultaneously when, on page Settings > Internet > Account information, the option "Connected network devices are also allowed to establish their own Internet connections (PPPoE Passthrough)" is enabled. You will then need an Internet dial up software, such as Windows DUN or FRITZ!DSL Internet to establish the Internet connection.

How can the FRITZ!Box be used with a router? (Router --> F!B --> Internet) A router can be connected to a LAN port of your FRITZ!Box and use the DSL Internet connection established by the FRITZ!Box.

Please follow the instructions on how to connect the FRITZ!Box and a router.

1 Configuration of the router
1. Please ensure that the router itself does not try to establish a DSL
Internet connection (via an internal or external DSL modem) but simply
functions as switch.
2. Disable the DHCP server of the router.
3. Change the IP address of the router to an IP address of the IP network
configured on the FRITZ!Box (by default 192.168.178.x (subnet mask:
255.255.255.0).
WARNING:
The IP address assigned to the FRITZ!Box (by default 192.168.178.1)
cannot be assigned to the router.
4. Assign the IP address of the FRITZ!Box (by default 192.168.178.1) as
the default gateway and DNS server

2 Connection of the router to the FRITZ!Box
Connect the router to a LAN socket of the FRITZ!Box with the provided red
network cable.
WARNING:
In this configuration, the FRITZ!Box must not be connected to a port of
the router labelled "WAN", "ADSL" or "DSL".

3 Configuration of the computers connected to the router
Check that all network adapters of the computers that are connected to
the router are configured for the automatic assignment of IP addresses
(DHCP).

4 Configuration of the FRITZ!Box
1. Enter the FRITZ!Box user interface by entering the assigened IP
address, by default 192.168.178.1, in the address bar of your browser.

2. Enable the expert mode via Settings > (Advanced Settings >) System >
Expert Mode > check "Show expert settings" > "Apply".

3. Goto System > Network Settings > IP Addresses > enter the fixed IP
address and the appropriate subnet mask > check "All computers are
located in the same IP network" and "enable DHCP server" > "Apply".
4. Go to Internet > Account Information > select "Internet connection via
DSL" > select "Use one Internet connection for all computers (router)
", enter your Internet access data > click "Apply".

Met vriendelijke groet,


Ook dit werkt niet en kan ook niet werken omdat volgens deze uitleg het modem ook als router fungeert, wat dus niet de bedoeling is.

Alle instellingen van het modem zijn standaard behalve bij: Advanced Settings - Internet - Account Information. Daar staat dus "Use Fritz!Box as a DSL modem" aan gevinkt.
Plaatje: http://tweakers.net/ext/f/80ulhslWrha...1/full.png

Overigens kan ik via de lan niet meer inloggen in de box als deze optie aan staat wat logisch is omdat het router gedeelte dan uit staat. Inloggen gaat dan alleen via Wifi nog.

Wie weet de oplossing?
 
superpeter
hallo lynx

is het u al ge lukt met de fijne fb7430 want ook ik zit met dit probleem
mij in iedergeval niet.
en daarheb ik vandaag maar eens een mail aan ge waagt naar xs4all want uit ijnderlik zijn hun de leveransier waarmee we een kontrakt hebben.
ik hoop dat ze kunnen helpen maar ik ben bang van niet.
mogt ik een oplosing hebben dan zal ik het laten weten
 
alfranatic
Met alle respect lynx..
maar uh..dat van modem en router tegelijkertijd klopt toch wel degelijk...
je kan er daarna tenslotte nog zoveel aansluiten....Frown
 
Deze website gebruikt Awin affiliate links en Google advertenties, om deze service voor iedereen gratis te houden.
Spring naar forum:
Nieuw onderwerp Antwoorden
Gebruik BBcode of HTML om naar; 'PPPoE Pass Through', te verwijzen!
BBcode:
HTML:
Vergelijkbare onderwerpen
Onderwerp Forum         Laatste bericht
FritzBox 7369 PPPOE Passthrough Fritzbox : 3 27 jan 2017
PPPoE Error: Timeout Storing : 3 04 dec 2016
Advertentie